ProductsPatio DoorsStandard Sliding Patio Doors
Standard Sliding Patio Doors
Two-panel sliding glass patio door — one fixed, one operable — a practical everyday choice.
Interior view — Standard Sliding Patio Doors
Internal mini-blinds option
Twin locking system
Quiet rollers
Heavy-duty screen
Transoms & sidelites
Swipe to compare
How it works
A conventional sliding patio door uses one fixed panel and one horizontally sliding panel. Because the panel slides rather than swings, no interior or exterior space is lost to a door arc. Available hardware includes twin locking hooks, an anti-locking device for smoother latching, and heavy-duty quiet rollers on an anodized aluminum track. Internal mini-blinds can be sealed between the glass for privacy without cords or dusting.
Best for
Everyday indoor-outdoor access without giving up floor space to a door arc.
Configurations
2, 3 and 4 panel options.
Choose a panel count, then a layout, to see how the door operates, how wide the opening becomes and which sizes are available. Tap the diagram to slide the operating panels open and closed.
2 panel configurations
The classic patio door layout: one fixed panel and one operating panel that slides behind it. Sizing is confirmed on site, and the operating side is chosen so the door opens away from your furniture and traffic path.
- Clear opening
- Roughly half of the total frame width opens.
- Best for
- Standard rear walkouts, kitchens and dining rooms replacing an existing patio door in the same opening.
- Widths from 58½" to 95½", heights 79½", 81½" or 95½"
- Twin locking system and quiet oversized rollers standard
- Screen mounts on the operating side, colour matched to the frame
- Internal mini-blinds available on compatible glass sizes
Choose a layout
OX — Left panel operates. X = operating panel, O = fixed panel.
Viewed from inside, the left panel slides and the right panel is fixed. Choose OX when the walkway, deck stairs or barbecue sit to the left of the opening.
Schematic
OX — slide left
Sizes, inches (width × height)
Standard manufactured sizes for the OX layout. Custom sizes between these steps are available on most systems.
- 58½ × 79½
- 59½ × 79½
- 59½ × 81½
- 59½ × 95½
- 70½ × 79½
- 71½ × 79½
- 71½ × 81½
- 71½ × 95½
- 95½ × 79½
- 95½ × 81½
- 95½ × 95½
Sizes shown are frame dimensions. We measure your rough opening on site and confirm the exact unit size before ordering.
Key features
- Horizontal sliding operation
- Does not swing into interior or exterior space
- Large glass area
- 2, 3 and selected 4-panel configurations
- Left- or right-sliding operation
- Twin locking hooks and anti-locking device
- Heavy-duty quiet rollers on anodized aluminum track
- Interior and exterior colour choices
- Double- and selected triple-glazing options
- Optional internal mini-blinds sealed between glass
- Optional heavy-duty aluminum-framed screens
- Suitable for replacement and new construction
Technical Specifications
How these patio doors are built.
The following hardware, glazing, locking, screen and finishing details apply to the standard sliding patio doors we supply and install. Exact configuration is confirmed on your quotation.
Hardware options
Patio door hardware is built for smooth daily use and long-term security. Interior and exterior finishes can be specified independently, and keyed exterior cylinders are available.
- Upgraded North American hardware
- Handles, locks and keepers are sized for patio door loads and cycles. The hardware family is designed for smooth operation and positive latching.
- Interior and exterior colour choices
- Handle and keeper colours can be selected to match or contrast the frame colour inside and out.
- Keyed exterior lock
- A keyed cylinder on the outside provides secure entry from the yard or deck without needing an extra door.
Internal mini-blinds
Mini-blinds sealed between the glass panes are available on selected patio door systems and glass sizes. They give adjustable privacy and light control without exposed cords, dust or damage.
- Sealed between the glass
- The blinds live inside the sealed unit, protected from dust, pets and children. There are no dangling cords or external cleaning.
- Tilt and lift operation
- A discreet operator lets you tilt the slats for light and privacy, or lift the full stack out of the sight line for an unobstructed view.
- Availability
- Offered on systems with compatible glass sizes. We confirm fit during measurement so the blinds work with the chosen panel configuration.
Glass and glazing options
Patio door glass packages are built around high-performance Low-E sealed units with argon gas. Multiple Low-E combinations can be tuned for high solar heat gain or low U-values.
- Tempered Low-E glass standard
- Toughened safety glass with a Low-E coating comes standard, improving thermal performance and meeting safety requirements.
- Argon gas fill
- The insulating cavity is filled with argon gas to slow heat transfer and improve the overall U-factor compared with air-filled units.
- Multiple Low-E combinations
- Glass can be specified for high solar heat gain (SHGC) on south-facing openings or for lower U-values on shaded and north-facing elevations.
Twin locking system
A robust twin-lock system is standard, providing smooth latching action and improved security over a single-point patio lock.
- Heavy-duty locking hooks
- Two locking points draw the sash into the frame for a tighter, more secure closure than a basic single hook.
- Anti-locking device
- Prevents the hardware from accidentally locking in the open position, so the door can always be closed and secured normally.
- Smooth latching
- Engineered for consistent, low-effort operation even as seasonal expansion and contraction affect the frame.
Quiet rollers
Smooth, quiet rolling is one of the most noticeable differences in a premium patio door. The system uses oversized components on a precision track.
- Oversized North American rollers
- Larger rollers carry the weight of heavy glass panels with less effort and less track wear than small economy rollers.
- Anodized aluminum track
- A hard, corrosion-resistant track surface gives the rollers a smooth path and helps maintain the same glide over years of use.
- Long-term smooth operation
- Over-engineered parts and a tight tolerance between roller and track reduce the rattling and sticking that develops in lighter systems.
Screen options
Every patio door can be fitted with a screen. Standard and heavy-duty options are available with colour and mesh upgrades.
- Standard aluminum screen
- A 1½-inch aluminum-framed screen comes standard on most configurations, with a matching frame colour.
- Heavy-duty 3-inch screen
- A deeper, stiffer aluminum frame is available for homes with pets, children or high-traffic door use.
- Colour and pet-mesh upgrades
- Screen frames can be colour-matched, and pet-resistant mesh can be specified where claws or active use are a concern.
Transoms and sidelites
Fixed transoms above and sidelites beside the patio door can be engineered to match the system and sized to fit the opening.
- Engineered to match
- Transoms and sidelites use the same frame profile, glass package and exterior finish as the patio door for a unified look.
- Custom sizing
- Heights, widths and lite patterns can be adjusted to fill larger openings or align with existing windows.
Internal grills
Internal grill patterns can be added between the glass panes for a traditional divided-lite appearance without the maintenance of exterior applied grilles.
- Between-the-glass grilles
- Grille bars sit inside the sealed unit, protected from weather and cleaning, and create a refined shadow line.
- Pattern matching
- Colonial, prairie, perimeter and custom patterns can be used to coordinate the patio door with nearby windows.
Performance ratings
Patio door systems are tested to current North American standards for air, water and structural performance.
- Performance class and grade
- R – PG40.
- Water penetration resistance
- 360 Pa (7.52 psf).
- Air leakage
- A3 – 0.5 L/s/m².
- Design pressure
- ±1920 Pa (±40 psf).
Limited lifetime warranty
Patio door systems are warranted against defects in materials and workmanship arising from the manufacturing process. Coverage is parts-only; labour and installation-related costs are not included.
- Frame & sash
- Vinyl frame and sash components are covered against blistering, peeling, flaking and corroding for twenty-five (25) years.
- Insulated glass
- Sealed units are covered for twenty (20) years against seal failure visible as moisture, dust or dirt between the panes. Broken glass and thermal-shock damage are not covered.
- Hardware
- All hardware is warranted against defects for ten (10) years.
- Paint
- Paint is warranted for ten (10) years against peeling, cracking and major discolouration not caused by sunlight, heat or abrasive materials.
- Mini-blinds
- Internal mini-blinds are warranted for five (5) years.
Ready when you are
Ready to upgrade your home?
Free on-site estimates across the GTA. No pressure, no upsells — just a proper quote from a real installer.